Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Brake Pad Wear Light on the Audi Q5

Model: Audi Q5 MK 1, 8R - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

In this brief and simple guide, learn how to reset the brake pad wear light on the Audi Q5 by following the instructions below. First, get inside the vehicle and turn on the ignition; you will see the brake wear light appear on the dashboard.

Next, remove the front wheel to access the brake pad wear sensor; then short the connector by connecting a conductive wire. Now reconnect everything and turn on the ignition, checking that the light has reset!


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to reset the brake pad wear service light on the Audi Q5.
How to reset the brake pad wear service light on the Audi Q5.
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, we will see the instructions that will allow us to reset the brake pad wear service light on the Audi Q5. First, we lift the vehicle a…
Replacing Brake Pads on Audi Q5
Replacing Brake Pads on Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Let's replace the rear brake pads on the Audi Q5. Remove the wheel before replacing the pads. Lift the vehicle using a hydraulic jack to the desired …
How to Reset the Brake Wear Light on the Audi Q5
How to Reset the Brake Wear Light on the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Today, discover how to reset the brake wear light for the front or rear brakes on the Audi Q5. First, get inside the vehicle and connect your diagnos…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos