Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front headlight of the Audi Q5?

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Headlight

Here is a clear and comprehensive video tutorial on how to remove a front headlight of the Audi Q5. Let's proceed: lift the hood, unscrew the two screws at the top and one at the back, then remove the front grille and bumper trim, as we will need to remove two screws at the bottom of the headlight and one on the side. Once all of this is done, grab the headlight and push it outwards from the body, gently, to detach it from its housing and finally disconnect the power cable connector.

Posted on 29 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove a Tail Light on an Audi Q5
How to Remove a Tail Light on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In the following video, we will see how to remove the tail light on a 2017 Audi Q5. The first step is to remove the cover located underneath the tail…
How to remove the rear bumper light of the Audi Q5
How to remove the rear bumper light of the Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) Below we will see the instructions that will allow us to disassemble and replace the rear bumper light of the Audi Q5, in simple steps. First of all,…
Removing the Rear Light on Audi Q5
Removing the Rear Light on Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this tutorial video, you will learn how to remove the rear light located in the bumper of an Audi Q5. This task is within everyone's reach and doe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos