Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Grille on an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Grille

See other generations:
Video tutorial

This guide provides step-by-step instructions on how to remove and replace the front grille of the front bumper on an Audi A3. First, remove the front bumper by unscrewing all the fixing screws located at the top and bottom; unscrew the additional screws located on both sides of the front wheel arches, then detach the bumper from the sides.

Next, unscrew the internal screws of the grille, remove it, and replace it with the new one; secure it properly and refit the front bumper onto the bodywork, applying the reverse procedure!


Posted on 29 March 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents of an Audi A3
How to Remove the Air Vents of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Before you can begin, sit in the driver's seat of your Audi A3. Start by unfastening the internal clips that secure the air vents to the centre conso…
How to install the side grille on the Audi A3
How to install the side grille on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) The Audi A3 model 8V vehicles have side grilles on the front bumper. These grilles are prone to breakage due to accidents, scratches, and various oth…
Replacing the Bulbs in the Front Headlamp of an Audi A3
Replacing the Bulbs in the Front Headlamp of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Replacing the bulbs in the front headlamp of an Audi A3. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos