Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Below are step-by-step instructions on how to remove and replace the front bumper of the Audi A3. First, open the car's bonnet and start unscrewing all the screws found at the top, also removing the clips; likewise, remove the screws from the lower wing and the fastening elements located on both sides of the wheel arches, as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed, carrying out repairs or replacement; install and secure the bumper correctly!


Posted on 6 August 2026 by ScegliAuto


Related tutorials

Replacing the Front Bumper on the Audi A3
Replacing the Front Bumper on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) The video author instructs you on how to replace the front bumper on an Audi A3. First, remove the three screws from each front wheel arch. Next, ope…
How to Replace the Headlamp on the Audi A3
How to Replace the Headlamp on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the headlamp on the Audi A3? To remove the front headlamp of the A3, you need to take off the front bumper. Use a screwdriver to u…
How to Replace the Front Grille on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To replace the front grille on the Audi A3, you must first remove the front bumper. This can be done by loosening the screws located inside the wheel…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos