Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper of the Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Today in this guide we will see the instructions that will allow us to disassemble and replace the front bumper of the Audi A3 Sportback. First, we open the hood of the car and start removing all the screws and plastic clips located on the top; then we move to the front wheel arches to unscrew the additional screws using a Torx T20 key, as shown in the video.

At this point, we gently detach the bumper on the sides until it is completely removed, replacing it if necessary with a new one; all that's left is to secure it properly, following the video tutorial until the end!


Posted on 25 December 2024 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Audi A3
How to Remove the Front Bumper of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Below are step-by-step instructions on how to remove and replace the front bumper of the Audi A3. First, open the car's bonnet and start unscrewing a…
How to Replace the Headlamp on the Audi A3
How to Replace the Headlamp on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the headlamp on the Audi A3? To remove the front headlamp of the A3, you need to take off the front bumper. Use a screwdriver to u…
How to Remove the Front Bumper of the Audi A3
How to Remove the Front Bumper of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) To remove the front bumper of the Audi A3, open the bonnet to access the screws securing the bumper from the top. Once these screws are loosened, pro…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos