Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulbs in the Front Headlamp of an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the bulbs in the front headlamp of an Audi A3. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the plastic cover and remove it from the engine bay (located at the rear of the headlamp).

You will find the bulbs with the bulb holders; pull the bulbs out of the front headlamp and extract the damaged bulbs using a screwdriver.

Fit the new bulbs (always the correct type and size) and insert the bulb holder back into the headlamp housing. Reassemble all removed parts.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Replace Front Headlight Bulbs on Audi A3
Replace Front Headlight Bulbs on Audi A3
Audi A3 (2012-2019 / 8V, MK 3) To replace the blown bulbs in the front headlight on an Audi A3, remove the cover caps. Open the front bonnet by pulling the lever located at the bot…
Replacing the Front Headlamp Bulbs on an Audi A3
Replacing the Front Headlamp Bulbs on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Replace the damaged bulbs installed in the front headlamp of the A3. Lift the bonnet by pulling the lever located at the bottom right of the dashboar…
How to Replace the Front Headlight Bulbs on an Audi A3
How to Replace the Front Headlight Bulbs on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Replace the bulb mounted in the (left front) headlight on an Audi A3. Open the bonnet and secure it; locate the rear of the headlight, remove the rub…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos