Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front headlight of the Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Headlight

The instructions provided in this guide will explain the process of disassembling and replacing the front headlight of the Audi Q5. First, we open the hood of the car and start disassembling and removing the front bumper; to do this, we will unscrew all the fixing screws, located on the top and bottom of the bumper and on both sides of the front wheel arches, as shown in the video. At this point, we unscrew the screws of the headlight group, disconnecting the electrical connector located on the back to remove it; replace the bulbs or the entire front headlight.

Posted on 25 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on the Audi Q5 2.0 TDI
Replacing the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) This guide outlines the main steps to remove and replace the timing belt on the Audi Q5 2.0 TDI. First, open the hood and start by removing the front…
How to Change the Headlight Bulb on an Audi Q5
How to Change the Headlight Bulb on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this video, you will see the procedure to replace the headlight bulb on an Audi Q5. Usually, when there is a problem with the vehicle's headlights…
How to Replace the Headlight Bulb on an Audi Q5
How to Replace the Headlight Bulb on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) To replace the headlight bulb on your first-generation Audi Q5 (2008-2017) yourself, follow these steps. First, turn off the vehicle and lift the hoo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos