Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the reverse light bulb on the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

In today's video, you will see the instructions that will allow you to dismantle and replace the reverse light bulbs on the Volkswagen Tiguan. To access the reverse bulb, you will need to remove the rear wheel arch and detach the bumper at the sides; then remove the plastic cover to access the bulb, disconnecting the electrical connector as shown in the video.

At this point, replace the reverse bulb with a new one of the correct type; finally, reassemble the cover and the rear bumper, applying the reverse procedure!


Updated on 21 August 2026 by ScegliAuto


Related tutorials

Replacing the Reverse Light Bulb on the Volkswagen Tiguan MK1
Replacing the Reverse Light Bulb on the Volkswagen Tiguan MK1
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this brief and simple guide, you will learn the steps to remove and replace the reverse light bulb on the first series Volkswagen Tiguan. First, u…
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Follow these steps to remove and replace the reverse light bulb and rear bumper on the Volkswagen Tiguan. First, open the boot and start unscrewing t…
Guide to Replacing the Reversing Bulb on the Volkswagen Tiguan
Guide to Replacing the Reversing Bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Here are the main instructions to remove and replace the reversing bulb located on the rear bumper of the Volkswagen Tiguan. First, remove the side p…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos