Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Reversing Bulb on the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

Here are the main instructions to remove and replace the reversing bulb located on the rear bumper of the Volkswagen Tiguan. First, remove the side part of your rear bumper; to do this, unscrew the fixing screws found in the left wheel arch, as shown in the video.

At this point, disconnect the electrical connector of the reversing light to remove and replace the small bulb with a new one, inserting it correctly into the housing; finally, reassemble the bumper!


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Replacing the Reverse Light Bulb on the Volkswagen Tiguan MK1
Replacing the Reverse Light Bulb on the Volkswagen Tiguan MK1
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this brief and simple guide, you will learn the steps to remove and replace the reverse light bulb on the first series Volkswagen Tiguan. First, u…
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Follow these steps to remove and replace the reverse light bulb and rear bumper on the Volkswagen Tiguan. First, open the boot and start unscrewing t…
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today’s steps will show you how to remove and replace the reverse light bulb on the Volkswagen Tiguan, following the instructions below. First, move …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos