Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Reverse Light Bulb on the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

Follow these steps to remove and replace the reverse light bulb and rear bumper on the Volkswagen Tiguan. First, open the boot and start unscrewing the fastening screws located on the side of the rear bumper; then, lever the sides to detach it and gently remove it, as shown in the video.

At this point, disconnect the electrical connector of the reverse light, which is attached to the bumper, by removing and replacing the bulb with a new one; finally, refit the rear bumper!


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Replacing the Reverse Light Bulb on the Volkswagen Tiguan MK1
Replacing the Reverse Light Bulb on the Volkswagen Tiguan MK1
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this brief and simple guide, you will learn the steps to remove and replace the reverse light bulb on the first series Volkswagen Tiguan. First, u…
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today’s steps will show you how to remove and replace the reverse light bulb on the Volkswagen Tiguan, following the instructions below. First, move …
How to replace the reverse light bulb on the Volkswagen Tiguan
How to replace the reverse light bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In today's video, you will see the instructions that will allow you to dismantle and replace the reverse light bulbs on the Volkswagen Tiguan. To acc…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos