Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Tiguan
    4. : Replacement of the reverse light bulb of the Volkswagen Tiguan.

Volkswagen Tiguan - Video tutorial

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016
Part: Light bulb
Operation: Replacement of the reverse light bulb of the Volkswagen Tiguan.

Today's steps will show us how to disassemble and replace the reverse light bulb of the Volkswagen Tiguan, following the instructions below. First, let's move to the rear and begin by removing the bumper, unscrewing the fastening screws. Then, we will find the connector of the bulb to disconnect at the back, removing and replacing the small bulb of the reverse light, as shown in the video. At this point, let's check the functionality of the light before reassembling the rear bumper, following the reverse procedure!


Posted on 7 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Tiguan 2007-2016 - Why don't the reversing lights of the Volkswagen Tiguan come on? Read Answer
    • Tiguan 2007-2016 - How to replace the reversing light bulbs in the Volkswagen Tiguan? Read Answer
    • Tiguan 2016-2025 - How do you replace the parking lights on the Volkswagen Tiguan? Read Answer
    • Tiguan 2016-2025 - How to replace the parking light bulb on the Volkswagen Tiguan? Read Answer
    • Tiguan 2016-2025 - How many reversing bulbs does the Volkswagen Tiguan have? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos