Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Tiguan
  6. : Light bulb

Volkswagen Tiguan - Light bulb

Volkswagen Tiguan (2007-2016 / 5N, MK 1)
Replacement of the reverse light bulb of the Volkswagen Tiguan.

Today's steps will show us how to disassemble and replace the reverse light bulb of the Volkswagen Tiguan, following the instructions below. First, let's move …read all…
Posted on 7 January 2024 by ScegliAuto
Volkswagen Tiguan (2007-2016 / 5N, MK 1)
How to replace the reverse light bulb in the Volkswagen Tiguan.

In today's video, we will see the instructions that will allow us to disassemble and replace the reverse lights of the Volkswagen Tiguan. In order to access …read all…
Posted on 5 October 2023 by ScegliAuto
Volkswagen Tiguan (2007-2016 / 5N, MK 1)
Replacement of the reverse light bulb of the Volkswagen Tiguan.

Below we will see the steps that will allow us to disassemble and replace the reverse light bulb and the rear bumper of the Volkswagen Tiguan. First, we open …read all…
Posted on 2 June 2023 by ScegliAuto
Volkswagen Tiguan (2016-2024 / AD, MK 2, BW)
How to adjust the headlights of Volkswagen Tiguan

In today's video we see how to adjust the brightness of the headlights in the second series of the Volkswagen Tiguan. First we proceed by getting into the car …read all…
Posted on 11 May 2023 by ScegliAuto
Volkswagen Tiguan (2016-2024 / AD, MK 2, BW)
How to replace the mirror bulb on the Volkswagen Tiguan?

The replacement of the exterior mirror bulb on the Volkswagen Tiguan is done by prying it with a thin object, so that the hood can be detached. Below it, it …read all…
Posted on 27 May 2022 by ScegliAuto
Volkswagen Tiguan (2016-2024 / AD, MK 2, BW)
How to replace the mirror bulb on the Volkswagen Tiguan?

In order to replace the Volkswagen Tiguan mirror bulb, you need to use a lever to be able to detach the mirror glass from the inside of the shell. At this …read all…
Posted on 26 April 2024 by ScegliAuto
Volkswagen Tiguan (2007-2016 / 5N, MK 1)
Replacing the reverse light bulb on the Volkswagen Tiguan MK1

In this short and simple guide we will understand what are the steps to remove and replace the reverse light bulb on the Volkswagen Tiguan first series. First …read all…
Posted on 16 March 2024 by ScegliAuto
Volkswagen Tiguan (2007-2016 / 5N, MK 1)
Replacing the third brake light bulbs on the Volkswagen Tiguan MK1

In today's video tutorial we will see how to remove and replace the third stop light bulbs on the Volkswagen Tiguan first series, in simple steps. First, let's …read all…
Posted on 5 March 2024 by ScegliAuto

Cigarette Lighter (1) Airbags (3) Loudspeaker (2) Shock absorbers (1) Antenna (3) Car stereo (13) Roof Rack Bars (1) Battery (18) Air Vents (2) Gearbox (1) Spark plugs (1) Glow plugs (2) Bodywork (2) Glove box (1) Key (31) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (27) Checks and maintenance (158) Dashboard (2) Brake discs (1) Headlight (5) Tail light (7) Fog lights (5) Air filter (6) Cabin air filter (13) Diesel filter (2) Oil filter (3) Hand brake (3) Grille (2) Window lift switch (2) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (17) Rear light bulb (9) Interior lights ceiling light bulb (3) Dashboard light (1) Handle (10) Starter motor (3) Gear oil (2) Engine oil (5) Door panel (10) Front bumper (3) Rear bumper (5) Brake pads (2) Tires (6) Gear Shift Knob (3) Pump (3) Fuel pump (1) Door (5) Window lift button (1) Instrument cluster (31) Radiator (1) Wheel (3) Fuse box (38) Seat (6) Lock (5) Outside rearview mirror (11) Windscreen wipers (2) Thermostat (3) Central tunnel (1) Valve (1) Side window (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos