Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Tiguan
  6. : Air Vents

Volkswagen Tiguan - Air Vents

Volkswagen Tiguan (2007-2016 / 5N, MK 1)
How to replace the central air vents on a Volkswagen Tiguan

Before starting, we will have to sit in the driver's seat of our Volkswagen Tiguan. So let's start by disengaging and removing the upper caps present in the …read all…
Posted on 17 January 2024 by ScegliAuto
Volkswagen Tiguan (2007-2016 / 5N, MK 1)
How to replace the central air vents on a Volkswagen Tiguan?

Before starting, we will have to go and sit in the driver's seat of our Volkswagen Tiguan. So let's start by disengaging and removing the upper inserts present …read all…
Posted on 17 January 2024 by ScegliAuto

Cigarette Lighter (1) Airbags (3) Loudspeaker (2) Shock absorbers (1) Antenna (3) Car stereo (13) Roof Rack Bars (1) Battery (18) Air Vents (2) Gearbox (1) Spark plugs (1) Glow plugs (2) Bodywork (2) Glove box (1) Key (31) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (27) Checks and maintenance (157) Dashboard (2) Brake discs (1) Headlight (5) Tail light (7) Fog lights (5) Air filter (6) Cabin air filter (13) Diesel filter (2) Oil filter (3) Hand brake (3) Grille (2) Window lift switch (2) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (17) Rear light bulb (9) Interior lights ceiling light bulb (3) Dashboard light (1) Handle (10) Starter motor (3) Gear oil (2) Engine oil (5) Door panel (10) Front bumper (3) Rear bumper (5) Brake pads (2) Tires (6) Gear Shift Knob (3) Pump (3) Fuel pump (1) Door (5) Window lift button (1) Instrument cluster (31) Radiator (1) Wheel (3) Fuse box (38) Seat (6) Lock (5) Outside rearview mirror (11) Windscreen wipers (2) Thermostat (3) Central tunnel (1) Valve (1) Side window (1)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos