Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The importance of periodic inspection of the timing belt on the Audi Q5

Model: Audi Q5 MK 2, 80A - Years 2017-2025
Part: Timing belt

In this video, we can see how important it is to keep the timing belt of an Audi Q5 under control, even if we are far from the minimum mileage that the manufacturer normally indicates for changing the belt: in fact, the car we see had only just over 90,000 km, but the water pump was leaking very badly, and in this way it had damaged the belt almost irreversibly, which - if it had broken - would have seriously damaged the engine. Fortunately, they noticed the problem during the service, and were able to solve it before the issue became serious.

Posted on 27 June 2025 by ScegliAuto

Video tutorial

Related tutorials

The importance of checking the engine carefully during servicing.
The importance of checking the engine carefully during servicing.
Audi Q5 (2017-2025 / MK 2, 80A) In this video we see the importance of checking the maintenance, especially after 50,000 km, the functionality of the timing belt. In the case illust…
How and When to Change the Timing Belt on the Audi Q5 2.0 TDI
How and When to Change the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) Today's guide will show you how to remove and replace the timing belt on the Audi Q5 2.0 TDI. The manufacturer states that for this type of engine, t…
Guide to Removing the Timing Belt on the Audi Q5 2.0 TDI
Guide to Removing the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, you will see the steps and procedure to replace the timing belt on the Audi Q5 2.0 TDI. For this engine type, the timing belt replacem…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos