Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the horn fuse of the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Fuse box

Today we will explain how to replace the horn fuse of the Fiat Punto. The fuse box containing the horn fuse is mounted inside the passenger compartment specifically under the steering wheel panel, to replace the fuse and open the box it is necessary to remove the brush. Once the panel is removed, we can remove the 7.5 Amp red fuse number 1 and replace it with a fuse of the same amperage. Then we test the horn function, if the problem persists the cause could be a malfunctioning connector of the horn located in the engine compartment.

Posted on 28 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To remove the airbag from the Fiat Grande Punto, start by removing the horn fuse to prevent any sounds while you proceed with the operation. Locate t…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The fuses in the Fiat Grande Punto are located within two fuse boxes present in the vehicle: in this model, the first box can be found in the lower l…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, sit in the driver's seat of your Fiat Punto. Begin by unclipping and lowering the light control panel located at the bottom left of…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 1999-2011 - Where can I find the cigarette lighter fuse in FIAT Punto 188? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos