Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
Video tutorial

Follow these instructions to remove and replace the horn or sounder on your Fiat Punto in simple steps. First, open the bonnet of your car and locate the horn, situated at the bottom; then disconnect its electrical connector and undo the nut of the bracket to remove it, as shown in the video.

At this point, repair or directly replace the horn with a new one of the correct type; then install the new sounder, applying the reverse procedure for reassembly!


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Replace the Horn on the Fiat Punto
How to Replace the Horn on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this short and simple guide, you will see the steps to remove and replace the horn on the Fiat Punto, following the instructions below. First, ope…
How to replace the horn fuse of the Fiat Punto
How to replace the horn fuse of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Today we will explain how to replace the horn fuse of the Fiat Punto. The fuse box containing the horn fuse is mounted inside the passenger compartme…
Removing Horn from Fiat Grande Punto
Removing Horn from Fiat Grande Punto
Fiat Punto (1999-2011 / MK 2, 188) In today's tutorial, learn how to remove the horn from a Fiat Grande Punto. First, open and lift the bonnet and remove the grille by unscrewing the s…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to reset the tyre pressure warning light on the Dacia Sandero?

The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light.

Watch the video!


by ScegliAuto

More videos