Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Horn from Fiat Grande Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011

In today's tutorial, learn how to remove the horn from a Fiat Grande Punto. First, open and lift the bonnet and remove the grille by unscrewing the screws. Now access the horn and disconnect its electrical connector; then remove the 10 mm nut located at the back using a spanner: extract the horn from the vehicle and replace it with the new one. The video shows the installation of a different part from the original, so modifications may be necessary!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Horn on a Fiat Punto
How to Replace the Horn on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Follow these instructions to remove and replace the horn or sounder on your Fiat Punto in simple steps. First, open the bonnet of your car and locate…
Where are the fuses located in the Fiat Grande Punto?
Where are the fuses located in the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Each fuse of the Fiat Grande Punto is positioned inside one of the two fuse boxes installed on the car: the first one is located inside the passenger…
Where Are the Fuses Located on the Fiat Grande Punto?
Where Are the Fuses Located on the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The fuses on the Fiat Grande Punto are located within two fuse boxes installed in the vehicle: the first is inside the cabin, in the lower left part …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos