Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Fluid Reservoir on a Volvo XC90

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the windshield washer fluid reservoir on a Volvo XC90, loosen the screws that secure the front bumper to its housing. Once these screws are loosened, you can completely detach the bumper and proceed to loosen the screws that hold the headlight assembly in place.

By disconnecting the connectors, you can remove the right front headlight, as the windshield washer fluid reservoir is located behind it. The reservoir can be removed from its position by unscrewing the mounting screws and disconnecting the hoses, allowing you to install the new replacement part.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Replacing the Windshield Washer Fluid Reservoir on a Volvo XC90
Replacing the Windshield Washer Fluid Reservoir on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's learn how to disassemble and replace the windshield washer fluid reservoir on a Volvo XC90. First, open the hood of the vehicle and star…
Guide to Replacing the Timing Belt on the Volvo XC90 2.4D
Guide to Replacing the Timing Belt on the Volvo XC90 2.4D
Volvo Xc90 (2002-2014 / MK 1) Today's information will show the steps for replacing the timing belt on the Volvo XC90 2.4D. First, open the hood and remove the upper plastic cover…
Replacing the Radiator on a Volvo XC90
Replacing the Radiator on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the cooling radiator on a Volvo XC90, following the instructions below. First, li…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos