Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Grille of the Volvo S60?

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Grille

In this video tutorial, you can see how to remove and replace the front grille of the Volvo S60. First, remove the upper plastic strip by unscrewing all the screws that hold it in place. Next, by slightly lifting the top of the bumper, you will notice snap clips that serve as the main support for the grille to the body. Use a flat plastic tool to unclip all these clips, as shown in the video. After removing the upper clips, proceed to remove the lower ones, and the grille will come off. Installing the replacement will be much easier, as you just need to insert it from the front and ensure it is securely attached to the bumper.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heater Core in a Volvo S60?
How to Replace the Heater Core in a Volvo S60?
Volvo S60 (2000-2009 / MK 1) To replace the heater core in the Volvo S60, remove the side cover of the footwell located on the driver's side. This will provide access to the comp…
How to Replace the Cabin Air Filter in a Volvo S60 2019
How to Replace the Cabin Air Filter in a Volvo S60 2019
Volvo S60 (2019-2026 / MK 3) To correctly complete the replacement of the cabin air filter in your Volvo S60 third generation (model year 2019), follow these simple steps outline…
How to reset the maintenance light on the Volvo S60
How to reset the maintenance light on the Volvo S60
Volvo S60 (2019-2026 / MK 3) The necessary procedure to successfully complete the manual reset of the maintenance light on your latest model Volvo S60 is very simple, and you can…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos