Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Center Console in a Volvo S60?

Model: Volvo S60 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Removing the center console in a Volvo S60 is a simple and quick task. First, ensure the key is not in the ignition.

Next, remove the lower left panel of the tunnel, engage the white lever, and shift the transmission to neutral. Then, remove the knob, dislodge the upper air vent using a plastic trim tool, and with a Torx T20 wrench, unscrew the released screws.

At this point, grasp the entire console, disengage it, and disconnect the various internal connectors.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

Volvo S60 (2010-2018 / MK 2) In this tutorial, you will see how to remove the rear door panel on a Volvo S60, a very simple and quick operation. First, open the door in question,…
Volvo S60 (2010-2018 / MK 2) To replace the timing belt on the Volvo S60, you need to remove the engine block from its housing to access the left side of the engine block: here y…
Volvo S60 (2010-2018 / MK 2) Today we will discover the steps that will allow us to reset the service light for the routine maintenance of the engine oil change of the Volvo S60.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos