Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on a Volvo S60?

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Door trim panel

In this tutorial, you will see how to remove the rear door panel on a Volvo S60, a very simple and quick operation. First, open the door in question, then locate the rivets along the entire perimeter of the panel and disengage them using a small Phillips screwdriver. Once done, remove the cap inside the armrest and unscrew the exposed screw with a 3mm hex wrench. At this point, grasp the panel, pull it outward, and separate it from the door. To install the replacement, simply follow the reverse procedure.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Volvo S60?
How to Remove the Door Panel of the Volvo S60?
Volvo S60 (2010-2018 / MK 2) To remove the door panel of the Volvo S60, loosen the screws located at the center bottom of the panel, just below the armrest. Once these screws are…
How to Replace the Cabin Air Filter in a Volvo S60 2019
How to Replace the Cabin Air Filter in a Volvo S60 2019
Volvo S60 (2019-2026 / MK 3) To correctly complete the replacement of the cabin air filter in your Volvo S60 third generation (model year 2019), follow these simple steps outline…
Removing the Instrument Cluster from a Volvo S60
Removing the Instrument Cluster from a Volvo S60
Volvo S60 (2000-2009 / MK 1) Today, you will learn how to remove the instrument cluster from a Volvo S60. First, get inside the car and use a plastic trim tool to detach the plas…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos