Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the outer handle of the rear door of the Volvo S60

Model: Volvo S60 MK 3 - Years 2019-2026
Part: Handle

In this guide, we will discover the useful instructions for disassembling and replacing the outer handle of the rear door of the Volvo S60. First, let's open the rear door of the vehicle and start removing the small side cap; then, let's unclip the rectangular cover of the handle to remove it, subsequently taking out the entire handle from the door, as shown in the video. At this point, we will replace the outer handle with the new original one, securing it properly onto the door; then, let's ensure its correct functioning!

Posted on 21 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Outer Door Handle of the Front Door on a Volvo S60
How to Remove the Outer Door Handle of the Front Door on a Volvo S60
Volvo S60 (2019-2026 / MK 3) This guide provides the main instructions on how to disassemble and replace the outer door handle of the front door on a Volvo S60. First, open the v…
How to Remove the Rear Door Panel on a Volvo S60?
How to Remove the Rear Door Panel on a Volvo S60?
Volvo S60 (2010-2018 / MK 2) In this tutorial, you will see how to remove the rear door panel on a Volvo S60, a very simple and quick operation. First, open the door in question,…
Disassembly and replacement of the door speaker of the Volvo S60.
Disassembly and replacement of the door speaker of the Volvo S60.
Volvo S60 (2000-2009 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the front door speaker of the Volvo S60. First, we open the front do…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos