Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Panel of a Volvo S60

Model: Volvo S60 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

How to remove the panel of a Volvo S60? Don't worry, let's see together in this video how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine compartment.

Start the disassembly: use a pry tool to remove the plastic cover at the corner of the door, then use a screwdriver to remove the screws under the internal door handle. Detach the door panel, remove the screws from the speaker located on the door, and replace it with a new speaker.

Be careful not to lose any of the clips behind the plastic panel that was removed first. Replace the part and reassemble everything in reverse order.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the Volvo S60?
How to Remove the Door Panel of the Volvo S60?
Volvo S60 (2010-2018 / MK 2) To remove the door panel of the Volvo S60, loosen the screws located at the center bottom of the panel, just below the armrest. Once these screws are…
How to Replace the Cabin Air Filter in a Volvo S60 2019
How to Replace the Cabin Air Filter in a Volvo S60 2019
Volvo S60 (2019-2026 / MK 3) To correctly complete the replacement of the cabin air filter in your Volvo S60 third generation (model year 2019), follow these simple steps outline…
How to Reset the Maintenance Light on a Volvo S60
How to Reset the Maintenance Light on a Volvo S60
Volvo S60 (2019-2026 / MK 3) The procedure to correctly complete the manual reset of the maintenance light on your latest model Volvo S60 is very simple and can be done in just a…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos