Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery for the Volvo S60.

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Battery

We will briefly see the instructions that will allow us to disassemble and replace the battery of the Volvo S60. First, let's open the rear trunk hatch and start lifting the cargo area floor; we will find the battery inside, at the bottom left, as shown in the video. At this point, let's unscrew the screws of the battery bracket, then disconnect both terminals (positive and negative), as shown in the video. Now we remove the battery from its compartment and replace it with the new one (of the correct type and with the same amperage); we connect the battery and start the engine!

Posted on 1 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Battery Warning Light on a Volvo S60 MK2
How to Reset the Battery Warning Light on a Volvo S60 MK2
Volvo S60 (2010-2018 / MK 2) In this video tutorial, you will see the necessary procedure to reset the battery warning light on the Volvo S60. You can use these steps to reset th…
How to Replace the Key Fob Battery of the Volvo S60?
How to Replace the Key Fob Battery of the Volvo S60?
Volvo S60 (2010-2018 / MK 2) Replacing the key fob battery of the Volvo S60 is a very simple and inexpensive operation. For this, you will need a small flathead screwdriver and t…
How do you reset the "Low battery charge" message on the Volvo S60?
Volvo S60 (2010-2018 / MK 2) To make the "Low battery charge" message on the Volvo S60 instrument panel disappear, it will be necessary to open the hood to access the components …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos