Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Battery for Volvo S60

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Key

In this video, you will see how to disassemble and replace the battery of the remote key for a Volvo S60. First, take your remote key and remove the key by prying it with a sharp object. Then, open the remote into two parts to access the circuit board and the battery. Now, remove the old battery and replace it with a new one of the correct type (in this case, a 2430 3V). Make sure to insert it in the correct orientation. Finally, reassemble the two halves of the remote and reinsert the key into its designated slot!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Shell and Battery of the Volvo S60 Key Fob
How to Replace the Shell and Battery of the Volvo S60 Key Fob
Volvo S60 (2019-2026 / MK 3) In this brief guide, you will find instructions to disassemble and replace the battery and shell of the Volvo S60 key fob, as well as for most models…
How to change the battery of a Volvo S60 remote control
How to change the battery of a Volvo S60 remote control
Volvo S60 (2010-2018 / MK 2) Today we will see how to replace the batteries of the remote control of a Volvo S60, model produced from 2010 to 2018. Let's start the procedure by i…
How do you replace the battery of the Volvo S60 remote control?
How do you replace the battery of the Volvo S60 remote control?
Volvo S60 (2010-2018 / MK 2) To replace the battery of the Volvo S60 remote control, you need to remove the key from the top of the device, so that you can leverage inside its ho…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos