Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Chrome Exhaust Tips and Aluminum Effect Spoiler

Model: Volvo S60 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Body

See other generations:
Video tutorial

Lift the vehicle on a lift and remove the lower spoiler from the rear bumper: there are four Torx screws size T28 and clips along the entire edge to disengage with a plastic lever. Once the spoiler is removed, bring the chrome exhaust tips close to the original ones, aligning the edge of the exhaust to mark the cutting point: it is recommended to mount the saw blade backward (with the teeth facing inward) to insert the pipe to be cut inside the saw frame; repeat the process for the other exhaust.

Then insert the chrome exhaust tips, install the new chrome effect spoiler, position the exhaust pipe centering it in the designated housing of the spoiler, and tighten the clamp's locking pin.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Installation of Front Spoiler
Installation of Front Spoiler
Volvo S60 (2010-2018 / MK 2) If possible, lift the vehicle with a lift to facilitate the installation process. Unscrew all the screws along the lower edge of the bumper. Apply th…
Installing Chrome Mirror Cap
Installing Chrome Mirror Cap
Volvo S60 (2010-2018 / MK 2) Using a plastic trim tool, detach the mirror and disconnect the connectors attached to it. From inside the exterior mirror, you can see the plastic t…
Muffler Replacement Instructions
Muffler Replacement Instructions
Volvo S60 (2000-2009 / MK 1) Perform this repair with the vehicle cold. Lift the car on a hydraulic lift and remove the muffler starting from the flange located after the exhaust…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos