Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Camera on Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Onboard computer

The front camera on the Volvo XC90 is located within the automaker's logo and is very easy to remove. First, you need to remove the grille with the emblem, as you will need to work from the back of it. In this area, you will notice six clips securing the emblem: release them with a flathead screwdriver. Once done, you can remove the logo by pulling it by hand. Using a small flathead screwdriver, release the two side white plastic clips of the camera, and it will come out along with its support. Proceed in reverse for reassembly.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the dash cam on the Volvo XC90
How to install the dash cam on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) In this guide we will see the main information related to installing the dash cam on the Volvo XC90, in simple steps. First of all, let's get the das…
How to Remove the Front Door Panel of the Volvo XC90
How to Remove the Front Door Panel of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) In a few simple steps, you will learn how to remove the front door panel of the Volvo XC90 by following the instructions below. First, open the front…
How and When to Replace the Timing Belt on the Volvo XC90
How and When to Replace the Timing Belt on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's go over the procedure and instructions on how and when to remove and replace the timing belt on the Volvo XC90. For the diesel engine, t…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos