Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : How to disassemble the front door panel of the Volvo XC90

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 2 - Years 2015-2024
Part: Door panel
Operation: How to disassemble the front door panel of the Volvo XC90

In a few simple steps, we will see how to disassemble the front door panel of the Volvo XC90, following the instructions below. First, open the front door and start prying on the cover inside the handle; then unscrew the screws found underneath as shown in the video. Next, pry on the sides to detach and remove the panel, disconnecting the handle cable and the electric connector of the window switch; now it will be possible to access all the internal components of the door!


Posted on 8 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos