Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door handle in the Volvo XC90?

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Handle

In this tutorial, we can see how to disassemble the rear door handle in the Volvo XC90, an extremely simple and quick operation. First of all, we open the door in which we will work, then we remove the small plug placed on the inner edge of the same, at the same height as the handle, and unscrew the bolt indicated using a Torx T20 key. We then grip the handle, detach it from the door, and remove it from the housing. At this point, all that remains is to disconnect the power connector, connect the replacement, and follow the reverse procedure.

Posted on 12 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear door panel in the Volvo XC90?
How to disassemble the rear door panel in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In this tutorial we can see how to disassemble the rear door panel in the Volvo XC90, an extremely simple and quick operation. First of all, we open …
How to Remove the Front Door Panel of the Volvo XC90
How to Remove the Front Door Panel of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) In a few simple steps, you will learn how to remove the front door panel of the Volvo XC90 by following the instructions below. First, open the front…
How to remove the external handle of the front door of the Volvo XC90
How to remove the external handle of the front door of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the external handle of the front door of the Volvo XC90. First,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos