Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Door Handle of the Front Door on a Volvo XC90

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Handle

See other generations:
Video tutorial

Today, let's go through the instructions to remove and replace the exterior door handle of the front door on a Volvo XC90. First, open the front door of the vehicle and start by removing the small rectangular cap from the handle; then, remove the door panel by unscrewing all its mounting screws, as shown in the video.

At this point, disconnect the handle mechanism to remove it and replace it with the new one, securing it properly from the outside; then reattach the mechanism, checking its operation, and finally reinstall the door panel!


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Remove the Exterior Door Handle on a Volvo XC 90
How to Remove the Exterior Door Handle on a Volvo XC 90
Volvo Xc90 (2002-2014 / MK 1) In today's video, you will see the main instructions for removing the exterior door handle on a first-generation Volvo XC 90. First, open the front d…
How to Remove the Front Door Panel of the Volvo XC90
How to Remove the Front Door Panel of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) In a few simple steps, you will learn how to remove the front door panel of the Volvo XC90 by following the instructions below. First, open the front…
How to Remove the Rear Door Handle on a Volvo XC90?
How to Remove the Rear Door Handle on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In this tutorial, you will see how to remove the rear door handle on a Volvo XC90, a very simple and quick operation. First, open the door you will b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos