Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the rear door panel in the Volvo XC90?

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Door trim panel

In this tutorial we can see how to disassemble the rear door panel in the Volvo XC90, an extremely simple and quick operation. First of all, we open the door we will be working on, then we unclip the handle cover using a preferably plastic spatula. We then unscrew the two screws just released using a Torx T25 key, lever along the perimeter of the panel and separate it from the door. At this point, all that remains is to disconnect both the lock rope and the window lifter connector and install any replacement following the reverse procedure.

Posted on 11 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Volvo Xc90 (2015-2026 / MK 2) In a few simple steps, you will learn how to remove the front door panel of the Volvo XC90 by following the instructions below. First, open the front…
Volvo Xc90 (2015-2026 / MK 2) In this video, you will learn how to replace the rear stabilizer bar on the Volvo XC90. Raise the vehicle on a lift for comfortable access. Then, usi…
Volvo Xc90 (2015-2026 / MK 2) To quickly and safely replace the battery inside the key of your second edition Volvo XC90, you must follow these steps. First of all, make sure you …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos