Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Car door

To remove the rear door panel of the Volvo XC90, you need to take off the cover on the inner part of the armrest, near the window switch panel. Once you remove the cover, you can unscrew the bolts underneath; next, you need to remove the chrome trim above the door handle. Under the trim, there will be screws that must be removed using a socket wrench. At this point, you can detach the panel by disconnecting the related connector. The new panel can then be installed after connecting the connector.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear door handle in the Volvo XC90?
How to disassemble the rear door handle in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In this tutorial, we can see how to disassemble the rear door handle in the Volvo XC90, an extremely simple and quick operation. First of all, we ope…
How do you replace the internal temperature sensor of the Volvo XC90?
How do you replace the internal temperature sensor of the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In order to replace the internal temperature sensor of the Volvo XC90, you need to pry with an object so that you can completely detach the central t…
How to Remove the Front Door Panel of the Volvo XC90
How to Remove the Front Door Panel of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) In a few simple steps, you will learn how to remove the front door panel of the Volvo XC90 by following the instructions below. First, open the front…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos