Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Radiator Replacement

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Radiator

See other generations:
Video tutorial

If you need to replace the radiator, it is recommended to carry out this maintenance with the engine cold as you will need to drain the coolant; start by unscrewing the drain plug located under the radiator, then disconnect the various hoses; continue by removing the bonnet latch to complete the removal of the slam panel; finally, separate the support frame of the cooling fan to extract it from its seat, unscrew the pins that fix the lower part of the front bumper to the radiator support beam to complete the disassembly; then proceed in reverse for the installation of the new radiator and refill the cooling system with the appropriate antifreeze.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to Remove the Cooling Radiator from the Hyundai Santa Fe
How to Remove the Cooling Radiator from the Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) Here are the main instructions for removing and replacing the cooling radiator on the Hyundai Santa Fe. First, open the bonnet and start removing the…
Instructions for Replacing the Starter Motor
Instructions for Replacing the Starter Motor
Hyundai Santa Fe (2000-2006 / MK 1) If the starter motor does not engage when turning the ignition key, it is likely damaged; however, before rushing to replace it, ensure the battery i…
Instructions for Replacing Spark Plugs
Instructions for Replacing Spark Plugs
Hyundai Santa Fe (2000-2006 / MK 1) Remove the plastic engine cover: as this is a V6 engine, the three spark plugs on the front bank are easily accessible, but those on the rear bank ca…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos