Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Starter Motor

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Starter motor

See other generations:
Video tutorial

If the starter motor does not engage when turning the ignition key, it is likely damaged; however, before rushing to replace it, ensure the battery is charged. Once this check is complete, proceed with replacing the starter motor located beneath the gearbox, just behind the catalytic converter: it is essential that the engine is cold.

Disconnect the battery and access from below by removing the splash guard and then the heat shield attached to the starter motor. At this point, disconnect the power cables from the starter motor and remove the bolts securing it to the gearbox to complete the disassembly.

Then, reverse the process for installing the new starter motor (you may also opt for a refurbished one).


Updated on 18 February 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram for a Hyundai Santa Fe?
What is the Fuse Diagram for a Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) Fuses are electrical components that protect the electrical circuit of your Hyundai Santa Fe from voltage overloads or short circuits. They are prima…
Guide to Removing the Alternator from the Hyundai Santa Fe V6
Hyundai Santa Fe (2006-2012 / MK 2) Today's guide will show you the procedure for removing and replacing the alternator of the Hyundai Santa Fe, following the instructions below. First,…
Guide to replacing the timing chain on a Hyundai Santa Fe
Guide to replacing the timing chain on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) In this guide, we will outline the main instructions for replacing the timing chain on a Hyundai Santa Fe. To access the engine's timing system, you …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos