Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the starter motor of the Hyundai Accent?

Model: Hyundai Accent RB, RC, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Starter motor

See other generations:
Video tutorial

Most of the time, resorting to disassembling the starter motor of a car is dictated by its slipping when trying to start the engine, probably because the brushes are worn out, or because it needs to be replaced as it is burnt. An accurate diagnosis can be carried out on the bench, then proceed, as shown in the video guide available to us, to removal in the following way: Lift the vehicle, preferably on a workshop lift, locate the aforementioned starter motor at the bottom of the engine and first disconnect the power cables, then remove the two locking pins and finally extract it.


Posted on 17 December 2024 by ScegliAuto


Related tutorials

Replacing the Starter Motor on a Hyundai Accent
Replacing the Starter Motor on a Hyundai Accent
Hyundai Accent (2005-2009 / MK 2, MC) Need to replace the starter motor on a Hyundai Accent? Let's go through the removal of the damaged starter motor. Lift the bonnet, disconnect the bat…
Where is the Starter Motor Located on a Hyundai Accent?
Where is the Starter Motor Located on a Hyundai Accent?
Hyundai Accent (2010-2017 / RB, RC, MK 4) This video shows where the starter motor is located on the Hyundai Accent and how to proceed if you need to replace it, a very simple and quick opera…
Removing the Radio from a Hyundai Accent
Removing the Radio from a Hyundai Accent
Hyundai Accent (1999-2005 / LC, MK 1) Why replace the radio in the Hyundai Accent? Let's see how to remove it. Remove the trim around the central console using a plastic lever, detaching …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos