Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Engine Oil and Oil Filter on Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Engine oil

Pull out the dipstick for the engine oil and unscrew the cap. As stated on the cap itself, it is recommended to use 5w-20 oil for this car model. As shown in the video, removing the oil filter is really simple: access the underside of the engine bay and use a flat screwdriver to remove the cover by prying on the tabs. For the bolt that acts as a plug for the oil drain hole, you need to unscrew it with a 17 mm spanner. Collect the used oil in a container and refill the same amount from the upper container. Done!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil of the Hyundai Santa Fe 3.5 V6
How to replace the engine oil of the Hyundai Santa Fe 3.5 V6
Hyundai Santa Fe (2006-2012 / MK 2) Today's instructions will allow us to carry out the routine maintenance check, replacing the engine oil and oil filter of the Hyundai Santa Fe 3.5 V6…
How to Reset the Oil Light on the Hyundai Santa Fe
How to Reset the Oil Light on the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Resetting the oil service light on the 2018 Hyundai Santa Fe after replacing the filter and changing or topping up the oil is a very simple task that…
How to Replace Engine Oil and Filter on Hyundai Santa Fe
How to Replace Engine Oil and Filter on Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) How to replace engine oil and filter on a Hyundai Santa Fe? Follow this guide to proceed with the replacement. Lift the car with a column lift/jack a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos