Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tracer 900
Part:

In this tutorial, you will see how to remove the seat on the Yamaha Tracer 900, a very simple and quick operation, for example, if you need to replace it, access the battery, or any other component. First, insert the key into the cylinder located on the lower left side of the seat, then turn it counterclockwise. Grasp the passenger seat and, lifting it, disengage it from the base. Next, remove the indicated plastic block, operate the lever located in the central area of the bracket, and detach the main seat.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the seat height on a Yamaha Tracer 900.
How to adjust the seat height on a Yamaha Tracer 900.
Tracer 900 In this video, we see how to change the height of the seat on a Yamaha Tracer 900: we open the seat and remove the rear part, which is dedicated to t…
How to Replace the Battery on a Yamaha Tracer 900
How to Replace the Battery on a Yamaha Tracer 900
Tracer 900 This video tutorial explains the steps to independently replace the battery on a Yamaha Tracer 900. The first step is to remove the seat, as the batt…
Where is the starter relay on a Yamaha MT09 Tracer 900?
Where is the starter relay on a Yamaha MT09 Tracer 900?
Tracer 900 In this video, you can see where the starter relay is located on a Yamaha MT09 Tracer 900 and how to proceed if you need to replace it. As shown, it …

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos