Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the Service light of the Yamaha Xmax 250, it is necessary to insert the ignition key into the appropriate slot, so that it can be turned and the instrument panel can be turned on. After this has been turned on, you will need to press and hold the central button located on the left side of the instrument panel: the button must be held down for about 20 seconds. When it is released, you will see that the flashing Service light has turned off: to verify that the reset has been done correctly, you will need to turn off and turn on the vehicle's instrument panel.

Posted on 23 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Yamaha Xmax 250
How to reset the service light on the Yamaha Xmax 250
Xmax 250 In a few simple steps, we will see how to reset the service light on the Yamaha Xmax 250 scooter. First, put the scooter on the stand and turn on the…
How to Reset the Oil Service Light on the Yamaha Xmax 250?
How to Reset the Oil Service Light on the Yamaha Xmax 250?
Xmax 250 To reset the Oil Service light on the Yamaha Xmax 250, first turn on the instrument panel by turning the key in the ignition switch. Once the panel i…
How to reset the engine oil indicator (service) on the Yamaha Xmax 250
How to reset the engine oil indicator (service) on the Yamaha Xmax 250
Xmax 250 Today we will see the instructions that will allow us to reset the service maintenance light for the regular oil change of the Yamaha Xmax 250 scoote…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos