Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tracer 900
Part:

In this video, we see how to change the height of the seat on a Yamaha Tracer 900: we open the seat and remove the rear part, which is dedicated to the passenger. At the back of the rider's seat, there is a plastic cover that, once removed, allows us to take off the rider's seat itself. Above the battery, we have a kind of grid that has two positions; if we remove it from the position it's locked in and place it in the other one, which can be either the higher or lower position, it will also change the height of the rider's seat. We reinsert the rider's seat, put the cover back on, and then the passenger seat. Operation completed.

Posted on 23 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the seat on the Yamaha Tracer 900?
How to remove the seat on the Yamaha Tracer 900?
Tracer 900 In this tutorial, you will see how to remove the seat on the Yamaha Tracer 900, a very simple and quick operation, for example, if you need to replac…
How to Replace the Battery on a Yamaha Tracer 900
How to Replace the Battery on a Yamaha Tracer 900
Tracer 900 This video tutorial explains the steps to independently replace the battery on a Yamaha Tracer 900. The first step is to remove the seat, as the batt…
Where is the starter relay on a Yamaha MT09 Tracer 900?
Where is the starter relay on a Yamaha MT09 Tracer 900?
Tracer 900 In this video, you can see where the starter relay is located on a Yamaha MT09 Tracer 900 and how to proceed if you need to replace it. As shown, it …

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos