Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of an Aprilia RS 660

Model: Aprilia Rs 660
Part: Wheel

Video tutorial

Today, we will discover the instructions that will allow us to remove and replace the rear wheel of the Aprilia RS 660 motorbike. First, place the bike on a stand and begin loosening the central bolt of the rear wheel using a socket spanner with an extension; then lift the wheel off the ground by positioning the appropriate stand, as shown in the video.

At this point, disconnect the rear brake caliper and the drive chain, replacing the tyre if necessary; finally, remount the rear wheel, correctly adjusting the tension of the drive chain.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in an Aprilia RS 660?
Rs 660 In this tutorial, we will see how to change the engine oil in an Aprilia RS 660, a very simple operation to be done every 12 months. First, ensure th…
How to Change the Engine Oil on an Aprilia RS 660?
How to Change the Engine Oil on an Aprilia RS 660?
Rs 660 In this tutorial, you will learn how to change the engine oil on an Aprilia RS 660, a very simple and quick operation. First, ensure the engine is co…
How to Replace the Brake and Clutch Levers on an Aprilia RS 660
How to Replace the Brake and Clutch Levers on an Aprilia RS 660
Rs 660 Briefly, here are the steps to remove and replace the front brake and clutch levers on the Aprilia RS 660 motorcycle. First, place your motorcycle on…

How to Change the Engine Oil of the Piaggio Liberty 125?

To change the engine oil of the Piaggio Liberty 125, loosen the oil drain plug located at the central lower area of the bike, near the exhaust. By unscrewing the plug, you can collect the used oil in a suitably positioned container. Above the drain plug, you will also find the oil filter, which needs to be removed from its housing and replaced with a new spare part. After the replacement, top up by adding oil through the designated breather.

Watch the video!


by ScegliAuto

More videos