Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Clutch Levers on an Aprilia RS 660

Model: Aprilia Rs 660
Part:

Video tutorial

Briefly, here are the steps to remove and replace the front brake and clutch levers on the Aprilia RS 660 motorcycle. First, place your motorcycle on a stand and begin by removing the front brake lever; to do this, unscrew the lever's fixing pin using a socket key, as shown in the video.

At this point, install the new lever and adjust its travel; similarly, replace the clutch lever, following the video tutorial to the end for reassembly!


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Brake and Clutch Levers of the Aprilia RS 660
How to Replace the Brake and Clutch Levers of the Aprilia RS 660
Rs 660 This guide will show you how to remove and replace the brake and clutch levers of the Aprilia RS 660 motorcycle. First, place the bike on a stand and…
How to Replace the Rear Brake Pads on an Aprilia RS 660
How to Replace the Rear Brake Pads on an Aprilia RS 660
Rs 660 In this guide, we will discover the instructions on how to disassemble and replace the rear brake pads on an Aprilia RS 660. First, place the motorcy…
How to Remove the Rear Wheel of an Aprilia RS 660
How to Remove the Rear Wheel of an Aprilia RS 660
Rs 660 Today, we will discover the instructions that will allow us to remove and replace the rear wheel of the Aprilia RS 660 motorbike. First, place the bi…

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos