Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Grand I10
    4. : How do you replace the cylinder head gasket on the Hyundai Grand I10?

Hyundai Grand I10 - Video tutorial

Model: Hyundai Grand I10 MK  3, AC3, AI3 - Years 2019-2024
Part: Engine head
Operation: How do you replace the cylinder head gasket on the Hyundai Grand I10?

In order to replace the cylinder head gasket of the Hyundai Grand I10 you must first loosen the screws that secure the valve cover, which will have to be removed to give access to the underlying components. Here there will be the camshafts with the relative pulleys: by unscrewing all their fixing components, the corresponding shafts and pulleys can be removed, accessing the head below. The latter must also be freed from its fixing screws, removing it in order to be able to detach its underlying gasket. After removing the old gasket. It will be possible to insert the new one and then install all the components previously removed.


Posted on 11 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos