Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Engine Oil in a 2010 Hyundai IX35

Model: Hyundai ix35 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

Video tutorial

Today, you will learn how to pour oil into the reservoir to top it up when the oil warning light comes on. To perform this operation on a 2010 Hyundai IX35, open the front bonnet and wait 10 minutes after turning off the engine. Using the dipstick, check if the oil level is closer to the minimum or maximum; then unscrew the oil reservoir cap and pour in the required amount of oil. After topping up, you may need to reset the oil warning light.

If the light continues to flash, it may be necessary to check the operation of the oil reservoir sensors or perform an oil change.


Posted on 11 October 2026 by ScegliAuto


Related tutorials

How to Replace Front Brake Pads on Hyundai Ix35
How to Replace Front Brake Pads on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) Let’s replace the brake disc on a Hyundai Ix35. Raise the car to a comfortable height, then remove the bolts using a socket spanner or air drill and …
How to Change the Engine Oil on a Hyundai Ix35
How to Change the Engine Oil on a Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To change the engine oil on a Hyundai Ix35, loosen the bolts securing the plastic panel located at the bottom of the car, near the engine compartment…
How to Change the Oil on a Hyundai Ix35
How to Change the Oil on a Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) Changing the engine oil on a Hyundai Ix35? Lift the car to replace the engine oil and oil filter. Use a socket spanner to unscrew the oil sump bolt. …

Other guides you may be interested in

Location of the Jack and Spare Wheel of the Toyota Yaris

In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips. The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other.

Watch the video!


by ScegliAuto

More videos