Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Hyundai IX35

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

Video tutorial

To replace the engine oil in a Hyundai IX35, it is advisable to bring the engine to operating temperature, then switch it off and safely lift the vehicle. After unscrewing the oil filler cap, place a container under the sump and remove the drain plug, allowing the used oil to drain completely.

Once draining is finished, reinstall the drain plug with the corresponding gasket and proceed to replace the oil filter, lubricating the replacement gasket with a thin film of new oil before fitting. Next, pour the amount of oil specified by the manufacturer into the engine, start the engine for a few seconds, and check for leaks from the drain plug or filter.

Finally, check the oil level with the dipstick and, if necessary, top up until the correct level is reached.


Posted on 16 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Hyundai Ix35
How to Change the Engine Oil on a Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To change the engine oil on a Hyundai Ix35, loosen the bolts securing the plastic panel located at the bottom of the car, near the engine compartment…
How to replace the engine oil of the Hyundai IX35
How to replace the engine oil of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) When the red oil light comes on in the Hyundai IX35 car, it means that it is necessary to proceed with the oil and oil filter change. Before resettin…
How to Change the Oil on a Hyundai Ix35
How to Change the Oil on a Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) Changing the engine oil on a Hyundai Ix35? Lift the car to replace the engine oil and oil filter. Use a socket spanner to unscrew the oil sump bolt. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos