Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on a Hyundai Ix35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Engine oil

Changing the engine oil on a Hyundai Ix35? Lift the car to replace the engine oil and oil filter. Use a socket spanner to unscrew the oil sump bolt. Let the fluid drain into a disposal container and screw the sump bolt back in. After removing the oil from the engine, unscrew the filter located in the engine bay and replace it with a new one. Lower the car and lift the bonnet, securing it. Top up the engine with new oil. Measure the oil level with the metal dipstick several times until the ideal measurement is reached. Start the vehicle and check its operation.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Hyundai Ix35
How to Change the Engine Oil on a Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To change the engine oil on a Hyundai Ix35, loosen the bolts securing the plastic panel located at the bottom of the car, near the engine compartment…
How to replace the engine oil of the Hyundai IX35
How to replace the engine oil of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) When the red oil light comes on in the Hyundai IX35 car, it means that it is necessary to proceed with the oil and oil filter change. Before resettin…
How to reset the tyre light on the Hyundai IX35
How to reset the tyre light on the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Resetting the tyre light on your Hyundai IX35 is very simple, and the procedure to carry out the operation is truly within anyone's reach. Let's find…

Other guides you may be interested in

    Frequently Asked Questions

    • Ix35 2009-2015 - How much oil goes into the engine of the Hyundai IX35? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos