Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on a Hyundai Ix35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Engine oil

To change the engine oil on a Hyundai Ix35, loosen the bolts securing the plastic panel located at the bottom of the car, near the engine compartment. Once the panel is removed, you can loosen the bolt that serves as the oil drain plug: positioning a container under this cover will allow you to collect the used oil and close the drain plug. Next, reattach the panel at the bottom of the car and access the engine compartment; by opening the appropriate cap, you can pour the new oil into the reservoir.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai ix35 (2009-2015 / MK 1) When the red oil light comes on in the Hyundai IX35 car, it means that it is necessary to proceed with the oil and oil filter change. Before resettin…
Hyundai ix35 (2009-2015 / MK 1) Before you start, open the bonnet of your Hyundai IX35. Begin by unclipping and moving the clips that secure the top cover of the air filter. Next, u…
Hyundai ix35 (2009-2015 / MK 1) To replace the cabin filter on a Hyundai Ix35, open the glove compartment located on the passenger side. Once the glove compartment is open, detach t…

Other guides you may be interested in

    Frequently Asked Questions

    • Ix35 2009-2015 - How much oil goes into the engine of the Hyundai IX35? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos