Do it yourself
| ||||
|
Hyundai ix35 - Video tutorial
Model: Hyundai ix35
MK 1
- Years 2009-2015 Let's see the replacement of the brake disc on a Hyundai Ix35. We lift the car to a comfortable height to work on it, unscrew the bolts with a telescopic wrench or an air compressor drill, and remove the wheel. Then, we start unscrewing the bolts of the brake caliper, detaching it from the support (using a screwdriver to remove the brake pads). We install the new brake pads in the caliper and then attach the caliper itself to the brake disc. We lower the car to the ground once the parts have been replaced. We test the car's braking system with the dedicated pedal. Finally, we top up the brake fluid to complete the maintenance.
Posted on 8 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |