Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlamp from Hyundai IX35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Headlight

In this video tutorial, you will see how to remove the front headlamp from a Hyundai IX35. First, open the bonnet and using a ratchet spanner, unscrew the upper screws of the headlamp: you will also find another screw inside, as shown in the video. At this point, you can disengage the headlamp and pull it out: to remove it completely, disconnect the electrical connectors of the bulbs and replace them if desired! Additionally, the video shows how to remove the support bracket and the horn! For reassembly, follow the procedure in reverse.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Hyundai Ix35
Replacing Headlight Bulbs on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To replace blown bulbs on a Hyundai Ix35, let's look at removing the front headlight. Open the front bonnet by pulling the lever located at the botto…
How to replace the front bulb on a Hyundai ix35
How to replace the front bulb on a Hyundai ix35
Hyundai ix35 (2009-2015 / MK 1) Before you begin, open the bonnet of your Hyundai ix35. The bulb holder for the right front headlamp is located in the bottom right corner of the eng…
How to Replace the Front Headlight Bulb on a Hyundai IX35
How to Replace the Front Headlight Bulb on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this short video, see the instructions that will allow you to remove and replace the front headlight bulb on the first-generation Hyundai IX35. Fi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos