Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulbs on Hyundai Ix35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Headlight bulb

To replace blown bulbs on a Hyundai Ix35, let's look at removing the front headlight. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop. Locate the inspection cap of the headlight (at the rear of the headlight) and remove it. Disconnect the bulb holders from the headlight and extract the damaged bulbs using a screwdriver. Install the new bulbs (ensure they are the correct type and size) and insert the bulb holder back into the headlight housing. Cover the headlight holes with plastic caps. Test the lights on the Hyundai.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlamp from Hyundai IX35
Removing the Front Headlamp from Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial, you will see how to remove the front headlamp from a Hyundai IX35. First, open the bonnet and using a ratchet spanner, unscre…
How to replace the front bulb on a Hyundai ix35
How to replace the front bulb on a Hyundai ix35
Hyundai ix35 (2009-2015 / MK 1) Before you begin, open the bonnet of your Hyundai ix35. The bulb holder for the right front headlamp is located in the bottom right corner of the eng…
How to Replace the Front Headlight Bulb on a Hyundai IX35
How to Replace the Front Headlight Bulb on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this short video, see the instructions that will allow you to remove and replace the front headlight bulb on the first-generation Hyundai IX35. Fi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos