Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Lights on a Hyundai IX35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Headlight

In this video, you will see how to replace the position lights on the Hyundai IX35: open the bonnet of the vehicle, as it is easy to access the front lights without needing to remove anything, in fact, there is ample space to manoeuvre. After locating the bulb to change from the outside, look inside: each bulb is covered by a plastic cover, which you only need to unscrew. When changing the position light, which is the outermost one, be careful not to damage the washer fluid filler neck. The YouTuber removed the bulb directly without disconnecting the electrical connector first (which we recommend doing for safety). Refit the bulb without touching it with your hands - it is a common 501 - and then place it back: you will know it is in the right position when you hear a "click".

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Hyundai IX35
How to Replace the Battery on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) To replace the battery on a Hyundai IX35, open the bonnet and locate the battery in the engine compartment. Before starting, turn off the instrument …
How to deactivate the passenger airbag in the Hyundai IX35?
How to deactivate the passenger airbag in the Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) In this tutorial, we will see how to deactivate the passenger airbag in the Hyundai IX35, a very simple and quick operation that must be done after p…
How to Replace the Air Filter on a Hyundai IX35
How to Replace the Air Filter on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Before you start, open the bonnet of your Hyundai IX35. Begin by unclipping and moving the clips that secure the top cover of the air filter. Next, u…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos